• Date
    hydrogen
  • Date
  • Replies 3 replies
  • Subscribers 105 subscribers
  • Views 3215 views
  • Users 0 members are here

Sensor CEM+ - Multicast address?

Hello,

 

Is the multicast address in the cem+ network config only used for etcnet2?  Need to do some network overhaul, and curious if this address is important in my current system configuration... It seems like the net3/sacn multicast addresses are fairly well defined.  (Or is this used for dimmer feedback?)


Thanks

Parents

  • The multicast address defined in the config is for CEM+ inter-group communication, and is used in both NET2 and NET3 environments.

     

    The (default) multicast addresses used are as follows

    Pre CEM+ v3.0 -

    All Groups: 236.1.0.32

    Post CEM+ v3.0 -

    Group 1: 238.1.0.19
    Group 2: 238.1.0.34
    Group 3: 238.1.0.35
    Group 4: 238.1.0.36
    Group 5: 238.1.0.38
    Group 6: 238.1.0.55
    Group 7: 238.1.0.64
    Group 8: 238.1.0.65
    Group 9: 238.1.0.73
    Group 10: 238.1.0.77

     

    Marcus

Reply

  • The multicast address defined in the config is for CEM+ inter-group communication, and is used in both NET2 and NET3 environments.

     

    The (default) multicast addresses used are as follows

    Pre CEM+ v3.0 -

    All Groups: 236.1.0.32

    Post CEM+ v3.0 -

    Group 1: 238.1.0.19
    Group 2: 238.1.0.34
    Group 3: 238.1.0.35
    Group 4: 238.1.0.36
    Group 5: 238.1.0.38
    Group 6: 238.1.0.55
    Group 7: 238.1.0.64
    Group 8: 238.1.0.65
    Group 9: 238.1.0.73
    Group 10: 238.1.0.77

     

    Marcus

Children
Related

www.etcconnect.com