• Date
    Pedro Alves
  • Date
  • Replies 4 replies
  • Subscribers 105 subscribers
  • Views 4448 views
  • Users 0 members are here

UpdaterAtor again

Hi all

I don't know if is a problem with the 2 laptop's with win10 or another thing different but it's very strange what is happening.

I try for several times to use the UpdaterAtor to update 1 Gateway 4 port and some ColorSrc Par. It's on thing that i've already have done at 2/3 years ago. Know when I use this software what happens is:

- On the display of the Gateway during 4 hours it appears "Downloading from 10.101.50.120" (it's IP from laptop) but nothing change

- On the laptop the UpdaterAtor it recognize the Gateway but after I press the Update key the status of the gateway goes to offline and on the Software Version it appear ---

- If I try to use the Setup Version and try to download the latest ACN/DMX 4 Port Gateway the progress file never goes further than 24%

Is this happen to someone else??? What I'm doing wrong now???

Thanks

Pedro Alves

  • Hi Pedro,

    I think the first thing to check would be make sure you have the latest version of UpdaterAtor. Latest is 5.2.0 which you can download here:

    https://www.etcconnect.com/Products/Networking/Software/UpdaterAtor.aspx

    Assuming you have this, it sounds like this could perhaps be a windows firewall issue. I would check the windows firewall and make sure you have exceptions for Updaterator.

    Let us know what you find out - sorry for the difficulties!

  • in reply to tomsteer

    Hi

    Thanks for reminde me about the windows firewall, but unfortunately it seems that is not the problem. I turn off the windows defender and also give all the permissions to UpdateAtor but everything remains the same.

    I want to try an earlier version just to check if it is this new version of UpdateAtor that don't want to work with me, but I can´t find anywhere.

    Can someone tell me how and where I can download the UpdateAtor v5.0 or v4?? On the site of ETC only V5.3 is possible to download.

    Best regards

    Pedro Alves

  • Hi all

    I've got to say SORRY for this post. I have to say thanks to tomsteer for his aswer. It make me think a lot because after I disable the firewall of the laptop the UpdateAtor still doesn´t update nothing. And the problem was... the internet connection of my theatre. It has a lot of restrictions that we are always find a new ones. After I take the laptop to my home and download all the latest version of everything when I arrive to theatre it takes about 15 minutes to update the Gateway and the ETC Color Src Par that we have.

    So again I´M SORRY for this post and all the troubles it maybe have

    Pedro Alves

Related

www.etcconnect.com