Hello,
I am currently hosted in a theater and they are full ETC network and dimmers. I also control the moving power supplies by the dimmers. When I unplug my network cable, the DMX values drop to zero and I lose not only the cue image but also the power to my projectors. I'm not very familiar with ETC and I'd like to know if it's possible to ask the Node to keep the values if it no longer receives dmx information on the network.
Thanks for your help!
There is a help system built within Concert and you can select the specific devices you might be having problems with.
Quicker way to find information.
You will find the hold last look settings under each port of the gateway as this can be set on a port by port basis. (Sorry the screen shot it a bit small)
There is a help system built within Concert and you can select the specific devices you might be having problems with.
Quicker way to find information.
You will find the hold last look settings under each port of the gateway as this can be set on a port by port basis. (Sorry the screen shot it a bit small)
