• Date
    ian_wright
  • Date
  • Replies 2 replies
  • Subscribers 66 subscribers
  • Views 3133 views
  • Users 0 members are here

Sensor+ Load Management Help!

Hello I am a newbie.

I want to enable Load Reporting on our 2 Sensor+ Racks. From what I heard is if he have a bulb go out the racks will report it.

How do I go about this? 

I have a Congo Jr. console, 2 CEM+ racks, and we are running NET3 ACN!

 

Thank you!

Parents

  • Hi Ian, 

     

    Load Recording / Reporting can only occur from 

    special Sensor modules, such as the D20AF; AF

    needs to be in the dimmer type abbreviation listed on

    the front side of the dimmer module. 

    The rack also needs to have AF cards installed in it

    and have AF activated : your dealer should be able

    to help determine this. 

     

    After this has been determined, we can help you with 

    using Load Reporting/ Recording. 

Reply

  • Hi Ian, 

     

    Load Recording / Reporting can only occur from 

    special Sensor modules, such as the D20AF; AF

    needs to be in the dimmer type abbreviation listed on

    the front side of the dimmer module. 

    The rack also needs to have AF cards installed in it

    and have AF activated : your dealer should be able

    to help determine this. 

     

    After this has been determined, we can help you with 

    using Load Reporting/ Recording. 

Children
Related

www.etcconnect.com