• Date
    mlkimmel
  • Date
  • Replies 2 replies
  • Subscribers 68 subscribers
  • Views 4795 views
  • Users 0 members are here

R20 module controlled from console

I am looking to replace a dimmer module in a Sensor rack to a R20 relay module.  Can the relay be parked on from an ION, or do you physically have to turn the breaker on and off?  

Thanks for any help anybody can give me on this question.

Michael

Parents

  • Hello Michael,

    In the simplest form of control, the R20 can directly replace a dimmer module (e.g. D20) and control would remain the same, albeit with an on/off.

    So if your dimmer module dims from a dmx address, then swapped out with an R20 the module would turn on above a certain level (say 50%) and off below.

    So yes they can be controlled remotely from your ION.

    Regards,

    Marcus

Reply

  • Hello Michael,

    In the simplest form of control, the R20 can directly replace a dimmer module (e.g. D20) and control would remain the same, albeit with an on/off.

    So if your dimmer module dims from a dmx address, then swapped out with an R20 the module would turn on above a certain level (say 50%) and off below.

    So yes they can be controlled remotely from your ION.

    Regards,

    Marcus

Children
Related

www.etcconnect.com