• State Verified Answer
  • Date
    Jason Lord
  • Date
  • Replies 4 replies
  • Subscribers 70 subscribers
  • Views 7680 views
  • Users 0 members are here

GFI question

Typical day, I overhear that FX will spray water on the set and my bestboy brought a bunch of 15amp edison GFI's wanting to plug them into the soco breakouts.

I've never encountered this before. Can GFI's be plugged into dimmer feeds?  We're using ETC Sensor3 racks.

Parents
  • 0

    This should probably be moved here but here you go.

    Bender LG620

    This is the one and only sophisticated GFCI that allows the user to dim all 6 channels of a socapex cable (together or independently) without compromising electrical safety! Because the LG620 uses state of the art technology that utilizes the UL943 inverse time curve, nuisance tripping is minimized dramatically. The Bender LG620 also does not suffer from nuisance tripping related to radio interference from walkie talkies.

    Note that it requires hot power so that the GFCI electronics can be powered if the circuits are dimmed.

Reply
  • 0

    This should probably be moved here but here you go.

    Bender LG620

    This is the one and only sophisticated GFCI that allows the user to dim all 6 channels of a socapex cable (together or independently) without compromising electrical safety! Because the LG620 uses state of the art technology that utilizes the UL943 inverse time curve, nuisance tripping is minimized dramatically. The Bender LG620 also does not suffer from nuisance tripping related to radio interference from walkie talkies.

    Note that it requires hot power so that the GFCI electronics can be powered if the circuits are dimmed.

Children
Related

www.etcconnect.com