Hi All,
I have an sr48+ rack with d20 dimmers controlled by a CEM+.
Tuesday 1/23 during a dimmer check, dimmer 124 powered on and has since not powered off. today is Thursday 1/25.
- from the console i have checked that dimmer/channels are not parked. release all = light stays on
- dmx has been disconnected. console ( Expression 3) has been powered down.= light stays on
- turned off all panic stations.= lights on
- checked set and release levels and they are uniform down the rack.
- multiple dimmers in slot result in light on.
- original dimmer in different slot shows normal function.
the only way i can turn off the dimmer is by setting it to off, or to 0. or tripping the breaker.
when i trip the breaker the signal light stays on but the circuit powers down.
I am at a loss as to what to do next.
any ideas?
Ken Frederickson
Production Manager
Tallahassee Community College.
