ThruSwitch vs ThruRelay

Looking in Concert at the ThruPower module options for an ESR rack, there are ThruSwtich modules and ThruRelay modules along with multiple options of for each of those. Is there any document that describes the differences between all of those different types?

I cannot find any documents beyond the Sensor Power Control Modules document, but it doesn't go into great detail.

Also, are ThruPower modules in Dimmer mode natively Reverse-phase, Forward-phase, or auto-sensing? Datasheets just say that it can be a "Dimmer".

Parents
  • ThruPower modules can be configured remotely via ETC's Eos family of consoles, Concert software, or the ThruPower SmartRack (TPSR) app. This remote configuration allows for dynamic adjustments to circuit modes during operation.

    For instance, in the ColorSource ThruPower system, users can select between dimmed, relay, or hot power output modes using a three-position switch for each branch circuit. This setup provides flexibility to adapt to various performance needs.

Reply
  • ThruPower modules can be configured remotely via ETC's Eos family of consoles, Concert software, or the ThruPower SmartRack (TPSR) app. This remote configuration allows for dynamic adjustments to circuit modes during operation.

    For instance, in the ColorSource ThruPower system, users can select between dimmed, relay, or hot power output modes using a three-position switch for each branch circuit. This setup provides flexibility to adapt to various performance needs.

Children
No Data
Related