So I have a new problem that I've never seen before...
My venue has two 96-channel Sensor 3 racks, along with a Paradigm module to control some of these dimmers for architectural purposes. As I am typing this, dimmers 1 thru 16 are randomly just popping on to full, sometimes one at a time, sometimes in random groups, and then all turn off after 1-2 minutes. There is no control coming from anywhere in the house. All lighting consoles and paradigm presets are turned off.
I tried resetting both CEMs and clearing all arch output on the paradigm, but the problem persists. I also checked that all the modules are seated correctly, and all air filters are clean.
Is there another issue that I am missing?
Thanks!