Smart Bar "ghosting"

Are talking about dimmers staying on after losing DMX? Or low light levels when the sliders are down?

What to do after losing DMX is a setting in the SmartBar. The other is an electronics failure.

it seems to be a "no DMX" issue .. very low level .. maybe 1% enough to make the filaments glow but not enough to emit light from the fixture. . .

I actually thought we solved this problem last year when I first posted but it's back . .

Hey Paul,

You mention that this bar is in your booth - what type of load is it running (tungsten lamps, LEDs, compact fluorescent, etc)? And what wattage?

SCR dimmers inherently have a lower limit of loads below which they don't run reliably - I am wondering if this is what you are seeing..

-Tom

Hey Paul,

You mention that this bar is in your booth - what type of load is it running (tungsten lamps, LEDs, compact fluorescent, etc)? And what wattage?

SCR dimmers inherently have a lower limit of loads below which they don't run reliably - I am wondering if this is what you are seeing..

-Tom