• Date
    Gareth
  • Date
  • Replies 4 replies
  • Subscribers 140 subscribers
  • Views 59 views
  • Users 0 members are here
Options
Related

lens tube angles

Hi 

I have 50 Deg. fixed lens tubes on some Color Source V profiles. It's a little wide. I was wondering if folk had tried moving lenses about within the lens tube. Thinking I might try it in the 36 Deg slot.

Is this ok? Anyone experimented with this? Suggestions or warnings?

Thanks

Gareth

Parents

  • Mari Galles, Technical Support Specialist told me in order to change a 50 to a 36....

    ColorSource V can use any of our lens tubes types, so we'll need to know if they have a standard, EDLT, or XDLT tube. If there's only one lens in it now, then it's standard and they'll need  2 lenses to make a 36deg. 7060A4021 would be the rear lens and 7060A4020 would be the front lens. 

    If there's only one slot marked as 36deg, then it's going to be too old to fit modern replacement lenses. if there are 2 50deg lenses in it, then it's not standard and we need to know what the labels on it say to identify it

Reply

  • Mari Galles, Technical Support Specialist told me in order to change a 50 to a 36....

    ColorSource V can use any of our lens tubes types, so we'll need to know if they have a standard, EDLT, or XDLT tube. If there's only one lens in it now, then it's standard and they'll need  2 lenses to make a 36deg. 7060A4021 would be the rear lens and 7060A4020 would be the front lens. 

    If there's only one slot marked as 36deg, then it's going to be too old to fit modern replacement lenses. if there are 2 50deg lenses in it, then it's not standard and we need to know what the labels on it say to identify it

Children
No Data

www.etcconnect.com