• Date
    a.hatim
  • Date
  • Replies 2 replies
  • Subscribers 71 subscribers
  • Views 139 views
  • Users 0 members are here

mosaic designer remot access

hello ,

i have an issue descovring a controller with mosaic designer, it appears in grey when we try to connect remotly but if we are in the same switch its appears in black .

what port are used by the mosaic designer i believe this information will help me autorise the acces via our firwall

for a reference ping is ok and the web interface is working fine

br

Parents

  • How is your remote access setup? VPN?

    Typically multicast addresses 239.192.38.8 + 239.192.38.7 need to be routed depending on our switch/ firewall to allow the designer software to communicate with the controllers. When a controller appears as grey in the network tab it means that your PC and the controller are not on the same network. 

Reply

  • How is your remote access setup? VPN?

    Typically multicast addresses 239.192.38.8 + 239.192.38.7 need to be routed depending on our switch/ firewall to allow the designer software to communicate with the controllers. When a controller appears as grey in the network tab it means that your PC and the controller are not on the same network. 

Children
Related

www.etcconnect.com