• Date
    mbradford
  • Date
  • Replies 3 replies
  • Subscribers 95 subscribers
  • Views 127 views
  • Users 0 members are here

ETC Mosaic

We have 5 touch screens on one Mosaic system for our house lights that are used for non show use. During a show we have a Hoglet 4 console that controls the house lights with some movers. We normally go to the touch panel and tell the house lights to turn off and take them over with the hoglet 4. the problem that I have is if someone goes to a touch panel and tells the house lights to turn on then that will over ride the hoglet 4 for those lights. Does anybody have a solution for this? Maybe a way to temporary disable the touch screens during a show.  

Parents

  • If you create a second duplicate interface add one page that is blank and black. then set all the touch screens that need to be locked to that interface. Then add a lock button and an unlock button somewhere in the first interface you should be able to lock by having the one screen make the others switch pages to the blank then back to the normal lock screen for unlock you will need to enable trigger controllers so you can select specific devices. I don't have a way to lab it up but it could work.

Reply

  • If you create a second duplicate interface add one page that is blank and black. then set all the touch screens that need to be locked to that interface. Then add a lock button and an unlock button somewhere in the first interface you should be able to lock by having the one screen make the others switch pages to the blank then back to the normal lock screen for unlock you will need to enable trigger controllers so you can select specific devices. I don't have a way to lab it up but it could work.

Children
No Data
Related

www.etcconnect.com