Echo Stations and multiple CEM3

Eveik

Yes you can daisy chain the wire, with that being said it can be hard to get 2 set of wire under the screw terminals so it may be best to outside of the racks hit a box with Wagos to drop to each rack.

When it come to rack 3 if you give the rack a different system # it will not listen to the presets

Setup

Rack

Change the system #

This will help avoid cross communication.

Thanks

Does having different system #'s for racks in the same space effect how they interact with each other (outside of CEM3 preset control mentioned) or with other ETC controls such as Eos Ti(Sensor feedback), Paradigm, or Conductor? Thanks.

The Channel Check (set/release level etc) functions from the web interface and facepanel only permit control dimmers in the same System, so you would lose the cross-rack Channel Check functionality.

On Conductor the automated email etc alerts can also use the System number as a filter.

It has no other effects.

Thanks Richard and Steve. I appreciate the assistance.

Thanks Richard and Steve. I appreciate the assistance.