• State Suggested Answer
  • Date
    Scott39918
  • Date
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 43 subscribers
  • Views 11148 views
  • Users 0 members are here

ECHO programming questions

Hey Folks...  I'm looking to design a small system for a client that really wants me to use the ECHO access that she already has on her phone / iPad.   When i'm looking online, i can't find ANY videos or better instructions on how to program the access software, specifically... what the fixture libraries are, or what the programming options are.  I have 20 LED fixtures that i'd like to put in there that are not ETC standard fixtures, so I'd most likely have to build profiles.  

Can anyone direct me to a good way to see how to program the Echo access with DMX scene controller?   I politely am begging for some insight.

Thanks everyone!

Parents
  • 0
    Hi Scott, we have an online training manual for EchoAccess that might be helpful. It can be found here: http://www.etcconnect.com/webdocs/Controls/EchoAccessApp/EchoAccessApp.htm

    As for what profiles are supported in the DMX Scene controller here is the current complete list:
    -- Intensity
    -- RGB
    -- RGBA
    -- RGBW
    -- RGB_S (Selador Desire® D22, D40, Source Four® LED Series 1, Source Four LED Series 2)
    -- RGB_SF (Desire D60)
    -- IRGBS (ColorSource® PAR, Spot)

    Please let us know if you have any other system design questions or feel free to contact one of our regional offices. Here's a list of all of them: http://www.etcconnect.com/Contact/Americas.aspx

    Thanks!
    -Lowell
  • 0 in reply to LowellOlcott
    Lowell,

    Thank you for your answer. That does help quite a bit. My Client has her heart set on some fixtures that are a RGBAW+UV. Can I create custom profiles for these or would be better choice be to use a console via DMX and record the looks.

    Thanks again in advance!
Reply
  • 0 in reply to LowellOlcott
    Lowell,

    Thank you for your answer. That does help quite a bit. My Client has her heart set on some fixtures that are a RGBAW+UV. Can I create custom profiles for these or would be better choice be to use a console via DMX and record the looks.

    Thanks again in advance!
Children
  • 0 in reply to Scott39918
    Hi Scott. DMX snap-shot would be your only option for any additional profiles besides those on the DMX Scene Controller list. Thanks!

    -Lowell
  • 0 in reply to Scott39918
    Hi Scott, sorry for posting late to this question but can you expand a bit on the fixtures with a UV channel that your client wanted to use?

    Could you post the make and model of the fixture?
    Are the fixtures used in a way that either the UV channel is on or the Color channels are on but not at the same time?

    I like to understand the way customers are trying to use the products and I haven't seen your use-case before.


    Thanks,

    Noah Zimonick
    Product Assurance │ ETC, Inc.

www.etcconnect.com