ECHO programming questions

Question

Hey Folks... I'm looking to design a small system for a client that really wants me to use the ECHO access that she already has on her phone / iPad. When i'm looking online, i can't find ANY videos or better instructions on how to program the access software, specifically... what the fixture libraries are, or what the programming options are. I have 20 LED fixtures that i'd like to put in there that are not ETC standard fixtures, so I'd most likely have to build profiles. 
 Can anyone direct me to a good way to see how to program the Echo access with DMX scene controller? I politely am begging for some insight. 
 
 Thanks everyone!

LowellOlcott · Answer

Hi Scott, we have an online training manual for EchoAccess that might be helpful. It can be found here: http://www.etcconnect.com/webdocs/Controls/EchoAccessApp/EchoAccessApp.htm 
 
As for what profiles are supported in the DMX Scene controller here is the current complete list: 
-- Intensity 
-- RGB 
-- RGBA 
-- RGBW 
-- RGB_S (Selador Desire® D22, D40, Source Four® LED Series 1, Source Four LED Series 2) 
-- RGB_SF (Desire D60) 
-- IRGBS (ColorSource® PAR, Spot) 
 
Please let us know if you have any other system design questions or feel free to contact one of our regional offices. Here's a list of all of them: http://www.etcconnect.com/Contact/Americas.aspx 
 
Thanks! 
-Lowell