Still a DMX stream problem.

For me, there is still a serious DMX problem that drag.
Already mentioned in the files of Beta dissussions.

When switching from one CUE to another with the fader, in some cases, not always, there is a hazard on the entire DMX stream. After showing you videos with real projectors difficult to film, here I show you with the rendering software "Capture" where it is also visible.
This is only visible with FADER manipulation, not with the button.
This in 2.0.0.5 and 2.5.0 beta 9.

Here at second : 0:05 - 0:07 and 0:10 for exemple.

DMX flashing

Seth Starr over 6 years ago

Hey Pascal,

Just want to clarify that you are using the DMX output and not the sACN network output? Also, can you send me the showfile you were using?

Thanks, ~Seth
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
PBo67 over 6 years ago in reply to Seth Starr

Hello Seth,

All devices are connected thru the physical DMX connector, and the Capture software, is controlled thru the ethernet connection (I do not know what protocol is used. Everything is on automatic, it's plug and play it's fantastic ! )

And same observation on these two physical output.

I hope , I'm clear enough !
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Anders Ekvall over 6 years ago in reply to PBo67

I don't remember if we have verified that the physical fader works correctly but I think Brandon had difficulties to reproduce this problem. Could you try to assign another of the top 4 faders to be the Crossfader to see if there is a mechanical problem.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
PBo67 over 6 years ago in reply to Anders Ekvall

Yes Anders, I have answer to Seth, and resend my show file. It is the same with another physical fader.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel