Still a DMX stream problem.

Hey Pascal,

Just want to clarify that you are using the DMX output and not the sACN network output?  Also, can you send me the showfile you were using?

Thanks, ~Seth

Hello Seth,

All devices are connected thru the physical DMX connector, and the Capture software, is controlled thru the ethernet connection (I do not know what protocol is used. Everything is on automatic, it's plug and play it's fantastic ! )

And same observation on these two physical output.

I hope , I'm clear enough !

Hello Seth,

All devices are connected thru the physical DMX connector, and the Capture software, is controlled thru the ethernet connection (I do not know what protocol is used. Everything is on automatic, it's plug and play it's fantastic ! )

And same observation on these two physical output.

I hope , I'm clear enough !

I don't remember if we have verified that the physical fader works correctly but I think Brandon had difficulties to reproduce this problem. Could you try to assign another of the top 4 faders to be the Crossfader to see if there is a mechanical problem. 

Yes Anders, I have answer to Seth, and resend my show file. It is the same with another physical fader.