ETC CS20 - after pulling down (switching off) the playback fader and switching to manual mode the cue remains running

Hi there!

I have a problem with CS20.

I record a scene to a playback fader (doesn't matter which physical fader).

Then I return all fixtures to home position.

Then I go to playback mode and pull up the fader - the scenes run as should.

Then I pull down the fader with playback - the fixtures dim out but moving heads continue to move in dark.

I switch to channel mode, choose any fixture, move any fader up - but fader continues to function as a playback fader outputting the same data I recorded into the scene.

Then I open fixtures parameters from the screen - I see that data is the same as I recorded into the scene.

Then I once again press Home - the fixture returns to home position.

Then I pull the fader down completely.

Then I pull the fader up - only then the fixture starts to work in manual mode.

Please tell me what to do to switch off the playback completely before going to manual mode.

PBo67 over 6 years ago

In which version are you ?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Ans Erne over 6 years ago in reply to PBo67

Thanks for reacting so fast! Frankly speaking, it's not me but my acquaintance who is having problems with a CS20. He's not an english speaker, so he asked me to translate his inquiry. And I did it from the first person as I was in a hurry. I believe he's got not the latest version. I'll try to find out later what version exactly he's in. Thanks once again and sorry for being a bit messy!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Seth Starr over 6 years ago in reply to Ans Erne

And, if they speak French PB can help
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
PBo67 over 6 years ago in reply to Ans Erne

Je suis français, si ça peut aider !
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
PBo67 over 6 years ago

If I understood correctly, I feel that everything is normal.To answer the question, to stop a playback you pull down the playback fader before to switch to manual mode, or clear ( with the clear button) playbacks, this works in all mode..
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Ans Erne over 6 years ago in reply to PBo67

As I understood from what my colleague had told me, CLEAR ALL does not clear playback memory. I have no chance to try the console myself so he'll try to update the firmware first. I'll write the results a bit later.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel