Chauvet Maverick MK Pyxis Profile

Basic mode is available in a Fixture Library Patch that is compatible with v3.2 of ColorSource: https://etcfixturescdnstorage.blob.core.windows.net/profiles/CSET_Fixture_Libraries/ETC_CS_Library_19_1_1.zip

The other modes are multi-emitter / multicell and are not controllable via ColorSource console.

I have been hoping to add this fixture as well.. I've updated and however still not finding the Pyxis.

Model: Colorsource 40 AV

SW: 3.2.1.5

Boot: 1.1

Library Version: 19.1.1

If I go to Setup->Patch->Add Device->Chauvet

I see no Maverick Pyxis fixtures.  Is it under a different name or am I missing something?

Thank you for pointing this out.  We are investigating.

Thanks, Matt. I had tried installing the library, but did not see the Pyxis fixtures. I was on an older firmware, so suspected it might be that. After some initial trouble updating the firmware, I've gotten the console updated to the latest firmware and library, but still no luck on the Pyxis fixture. I don't see it listed in the HTML Library Contents file either. Let me know how to proceed, thanks!

Thanks for looking into this...by chance is there any update yet?

jordomo teagerton we determined that this fixture is actually a "multicell" / "multi-emitter" fixture; It has three different intensities, for "Background dimmer", "Ring Dimmer", and "Beam Dimmer".  It is not possible for ColorSource consoles to natively control this fixture.

If you need to control this fixture type from ColorSource, you would need to create a couple of custom profiles that handle each of those portions of the fixture (or choose to ignore them).  For instance, you might create one custom profile that is the "Beam" of the fixture (including Pan/Tilt), and another that is the Ring portion of the fixture.  Then you would use two or three channels of the ColorSource to control a single fixture.

I apologize for missing this when the request was made.  Sorry for the trouble.

Matt Pumplin Thanks! Is it possible for ETC to roll that out in a library update? I am on Mac, and cannot run the exe Personality Editor. Or, if there's a way to create the fixture profile in the console itself, I'm happy to do it that way.