• State Not Answered
  • Date
    Marnix Kuling
  • Date
  • Replies 3 replies
  • Subscribers 58 subscribers
  • Views 3289 views
  • Users 0 members are here

Can not seen any fixtures using Gadget RDM

Hi,
I'm trying to program the modes of a Desire D60XTI. I'm using the Gadget together with a dongle. In Patch I have the Device Discovery set to Enabled. And the fixture gets DMX signal.
Still there are no fixtures popping up in the RDM device list.
Someone who has an Idea?

Thanks Marnix Kuling

Parents
  • 0
    Ensure that RDM is enabled for the Gadget (DMX Port 1) in Browser > General Settings > DMX Settings.

    Note that you need a complete, terminated DMX line and we recommend against using any splitters/boosters - though if there are then they need to fully support RDM.

    RDM Splitters and boosters are not recommended as they tend to make RDM very slow!
    - RDM has quite low bandwidth and splitters consume some overhead as well as allowing many more fixtures to be on the line.

Reply
  • 0
    Ensure that RDM is enabled for the Gadget (DMX Port 1) in Browser > General Settings > DMX Settings.

    Note that you need a complete, terminated DMX line and we recommend against using any splitters/boosters - though if there are then they need to fully support RDM.

    RDM Splitters and boosters are not recommended as they tend to make RDM very slow!
    - RDM has quite low bandwidth and splitters consume some overhead as well as allowing many more fixtures to be on the line.

Children
No Data
Related

www.etcconnect.com