congo junior console encoder display issue

Thanks for the reply, just to clarify though that the console display was working perfectly until I updated the software, I have updated the facepanel firmware also, does this have any bearing on the intermittent display

The software update should have no impact on a problem of this type, it's probably just coincidence. I still recommend contacting technical services about this problem.

The software update should have no impact on a problem of this type, it's probably just coincidence. I still recommend contacting technical services about this problem.

Hi, I have this same issue too. During the start up, U can see the text "Congo Jr", in all the displays. Very rare, but it happens that one of the 3 displays stays blank. By restarting again, probblem solved. I have this issue already since the beginning (july 2007) i already did a firmwear update, and i'm using now the Cobalt software. It seems to be happing less then before, but it has happend. Antoon Raes Theater Scala - Belgium

hi Belgium, what firmware do your wings have? Are they master playback wings or universal wings?

What firmware does tHe Congo Jr Facepanel have? 

You can see this in Setup -Update Tab. 

Hi Corey, I have the master playback wing, running firmware Congo_UI_1_3_01_09_0_01RC.SRC Antoon Raes Theater Scala Belgium