connecting net 3 rfr transmitter to older receiver

Hi Arturs,

whats the part number of the old Remote Control (Base Station + Handheld Part)?  It should be listed on the parts. 

How are you connecting old Base to Congo Jr? Via USB? 

Do you have a photo of old base?

thanks, 

Your old one is a cRRFU - only has backlit buttons.
As you guessed, the cRRFU receiver (USB or 6-pin XLR) is not compatible with the RFR.

The RFR and cRRFU use very different radio technologies.
The RFR is a bi-directional 2.4GHz link, while the cRRFU is a unidirectional low-frequency link (different freq. in US and EU)

The RFR has a small OLED display and wheels on the sides.
It requires a Net3 RFR Base Station - this has USB and Ethernet connectors.

I generally recommend connecting the base via Ethernet as this makes it very easy to put in a "central" location for maximum coverage.
When connected by Ethernet, you can power the Net3 RFR Base with PoE or a 'standard' USB charger.

Hi Arturs,

I am thinking by "Old Receiver" you mean cRRFU Remote. If this is the case, the cRRFU and Net3 RFR Remote Sets are based

on two different technologies and are not interchangeable. For your Net3 RFR Handheld, you will need to use a Net3 Base Station.

Here is a photo of the two different sets:

 

So for your Net3 RFR Handheld, you will need to buy a Net3 Base Station