• Date
    jolsson
  • Date
  • Replies 3 replies
  • Subscribers 56 subscribers
  • Views 2421 views
  • Users 0 members are here

Pixels, MS and Dynamics

8.1.1 offline

So, I have 10x Pixel RGBW patched as ch.1-10. I have them out on a Magic sheet and have set colors to go with int. and color.

Then I have a effect master with Dynamic Rainbow on.

I can see in output list that the DMX on the RGB channels change,but I can't get the color on the pixels to change on the MS. Only manually with the normal color control.

Johannes

Parents

  • This is intentional, it's because Dynamics vary around a central 'base' value.

    As they're easier to adjust if you know what the central value is, it was decided (a very long time ago) that it's better to display the 'base' for all LTP parameters in both Live and blind attribute views, rather than the continually changing 'output' values.

    - Eg You usually want to know that the fixtures are pointed "Downstage centre" and doing an effect around that, so you can 'nudge' them left or right a bit.

    Thus anywhere the LTP values are displayed, you'll see the 'base' used for the dynamics.

  • in reply to Richard

    I get it in the position part. but this is colors...

Reply Children
No Data
Related

www.etcconnect.com