Keyboard shortcuts for DYN EFFECT and REM DIM and...

Hi,

You can assign any button to masters and use the master button to activate. If you are running v8.1, you can assign any button to the new User Soft key pages on the right side of the screen.

Anders

Hi,

You can assign any button to masters and use the master button to activate. If you are running v8.1, you can assign any button to the new User Soft key pages on the right side of the screen.

Anders

Hi thanks for the reply.

In fact, my question was a bit imprecise. I have bought a Xkeys-XK128 to use with a Cobalt Nomad on a MacBook pro and I was wondering if some missing keyboard shortcuts for REM DIM and other keys exists. I have found a way to assign Midi Notes to the missing keys like [+%, -%, RemDim, DynEffect, U1, U2, U3, etc...] with ControllerMate 4.3 (full version). The midi command works in standard mode and now it works fine for me.

I've attached the keys label in Pdf  and the file to use with ControllerMate for those who are interested.

Best wishes

Matt

XKEY_XKE128_Label_Cobalt10.pdfCobalt10_Layer1_works.cmate.zip

And for those who want to see the result...

Cool!

Hi could you explain more about that "you can assign any button to the new User Soft key pages on the right side of the screen"

Thanks :) 

You have three buttons called S1 S2 and S3. hold setup/F11 and kick on the soft button on screen and you will get a window where you can pick what ever button from the desk. U have on S1 most of the Select ch buttons. like all, 2nd, 3nd and so on. always only 1 button press away and no need to dig deeper to get them.

On nomad this helps a lot when you can make setups of buttons from the face panel you often use.

Hi F11 do nothing on my Mac (last version of EOS)

I find Keyboard combinaison and no screen button because I create keyboard control and I want to add S1 to S6.

Thanks for your return and your help

yvanbonninyou're in the cobalt forum, but you're asking Eos questions...

oups ! sorry I work on cobalt and Eos . I go to check your explanation and I come back

I don't find S1 S2 S3 button in cobalt. in my virtual controller on the screen. I know the press F11 with flash any button to configure it. But can't find solution between that and FAN control on my Mac 

Do you have a vertical view on the right side of your screen where you have 10 soft keys? This is where the new soft key pages are.

thank and sorry, I find it. Do you known the midi address for this soft keys ? Thanks lot