• Date
    krabe
  • Date
  • Replies 3 replies
  • Subscribers 58 subscribers
  • Views 2660 views
  • Users 0 members are here

Sunstrip limited to 9 cells in magic sheet

Hi, 

I've tried to make pixel grid with Sunstrip Active using a multicell device.
If my channel's device is121, I can add 121.1 thru 121.9 but impossible to have 121.10.
If i choose to increment channels with magic sheet tools 121.10 become 121.0 and if I try to enter 121.10 in target, it become 121.1
I tried in eos magic sheet, it works fine.
Any tips for me? (except converting sunstrip device to 10 channels)

Parents

  • In Magic Sheets, the cell numbers are entered double-digit for fixtures that have 10 or more cells.

    So Channel 1, Cell#1 should be entered as "1.01", cell #10 as "1.10"

    Unfortunately there is currently a refresh limitation, it will not correctly display cell numbers above .9 until you exit Edit mode after setting the cell number.
    At that point it will check the fixture type and update "1.1" to "1.10" if cell #10 exists.

Reply

  • In Magic Sheets, the cell numbers are entered double-digit for fixtures that have 10 or more cells.

    So Channel 1, Cell#1 should be entered as "1.01", cell #10 as "1.10"

    Unfortunately there is currently a refresh limitation, it will not correctly display cell numbers above .9 until you exit Edit mode after setting the cell number.
    At that point it will check the fixture type and update "1.1" to "1.10" if cell #10 exists.

Children
Related

www.etcconnect.com