Bug with the Gel picker on Cobalt 8.2.2.50 ?

Hi techlumiere ,

I've just tested this with the fixture and the 8.2.2.50 software and found no issues.

Which mode are you operating the fixture in?

• If you are using Expanded Mode, you will need to set the "Color XFade" parameter to Full (it homes to 0 in the default template but you can edit this) to have the fixture listen to the color controls.
• If you are in Studio Mode or 1Ch mode, the fixture only operates in whites and does not listen to color controls.

Hello Starksk,

Thank you for your reply

I tried all the modes on both profiles (Colorspot junior and Lustr 3 X8.) I confirm that the colors do not work with the Picker gel on my CongoKid in version 8.2.2.50. My profiles lights up in white whatever color is requested. I can only use the colour picker which is not practical for a careful gel choice. I have no problems with version 7.3 of Congo.

I tried your solution with the Xcolorfade but it does not solve the problem on version 8.

I also tried with a par led Chauvet Pro Colorado 2 Quad zoom tour in Tour mode. I have exactly the same problem. The color picker works but the gel picker does not work!. I can't find a solution?

Can you confirm which gel picker you are using when you see this behaviour?

I am seeing some weirdness in the gel picker tab (from going to Browser>Devices>Gel Picker...) but not from the gel library  in the color picker tab

For example, this works:

But this one has some quirks depending on the gel I pick:

If you are using the Gel Picker in the second image, please share which gel manufacturer you are trying to use.

Can you confirm which gel picker you are using when you see this behaviour?

I am seeing some weirdness in the gel picker tab (from going to Browser>Devices>Gel Picker...) but not from the gel library  in the color picker tab

For example, this works:

But this one has some quirks depending on the gel I pick:

If you are using the Gel Picker in the second image, please share which gel manufacturer you are trying to use.

Hello,

I think, I found the problem.

To choose a gel, I use the Devices control and gelatines, I write the gel number and I choose the manufacturer. The profile lights up in white which does not correspond to the requested color.

I try to use the gel picker (as your second image), and it doesn't work.

But if I use the color picker (as your first image), I get the desired colors . Then I come back to the gel picker and it works. It's very strange.

The problem appears when you start the console. But when you load a new file without restarting the console, the problem disappears and everything works normally.

Thanks for your help.

Have a good day.

Hello . I tried using the 2nd pictured gel picker above  recently and had no luck with it at all .  Even device control tab with # then manufacturer didnt give any results . Both have worked in the past and i missed it a lot