• Date
    rkettridge
  • Date
  • Replies 3 replies
  • Subscribers 66 subscribers
  • Views 7632 views
  • Users 0 members are here

Template for scroller with fixture intensity

Hi all

 

We have many scrollers on PARCans using a Congo Jnr. What we would like to do is create a template which has the PARCan as the intensity and the scroller as the colour attribute on the same fixture. Unfortunately our dimmers are hard patched to the first 200 odd channels. Aparantly on some desks it's possible to do this by giving each fixture 2 dmx channels (one for the dimmer and one for the scroller). Unfortunately we have not found a way of doing this on the Congo. Our other idea was to have a set offset between the dimmer and the scroller but, doing this, the desk does not allow anything to be patched between the two channels.

 

Is there a way to do this? 

 

Thanks

 

Rob Kettridge

 

Parents

  • Hi Rob,

    it is working in the devicelist, there you can have a channelnumber and a device attached to the channelnumber, the channel can have another dimmernumber on any universes. Open the device list from the browser with the mouse or from the live with MODIFY+DEVICE. 

    type the channelnumber press insert, then go in the device column press modify and choose the scroller templete, then go to the adress column and enter the dmx-adress of the scroller for exemple ( 320.2) and press modify. then go to the scroller roll and press modiy to choose your scroller roll.

    U can also insert your 20 scroller´s with the WIZARD and edited the channelnumbers later, but U have to choose a Channelnumber in the Wizard.

    Fazit: 

    You can not have a Templete for the intensity and the color, it is not possible to have a templete with an offset it is always continuning, (DMX1,DMX2,DMX3, and so on--> 301.2,302.2,303.2). 

    But you can patched in the device list with the channel of the parcan (which could be the same as the dimmer adress) and the scroller adress on another univers, or on the same univers. 

     

    Hope that helps,

    bye Roman 

Reply

  • Hi Rob,

    it is working in the devicelist, there you can have a channelnumber and a device attached to the channelnumber, the channel can have another dimmernumber on any universes. Open the device list from the browser with the mouse or from the live with MODIFY+DEVICE. 

    type the channelnumber press insert, then go in the device column press modify and choose the scroller templete, then go to the adress column and enter the dmx-adress of the scroller for exemple ( 320.2) and press modify. then go to the scroller roll and press modiy to choose your scroller roll.

    U can also insert your 20 scroller´s with the WIZARD and edited the channelnumbers later, but U have to choose a Channelnumber in the Wizard.

    Fazit: 

    You can not have a Templete for the intensity and the color, it is not possible to have a templete with an offset it is always continuning, (DMX1,DMX2,DMX3, and so on--> 301.2,302.2,303.2). 

    But you can patched in the device list with the channel of the parcan (which could be the same as the dimmer adress) and the scroller adress on another univers, or on the same univers. 

     

    Hope that helps,

    bye Roman 

Children
No Data
Related

www.etcconnect.com