Congo junior startup problem - 3 beeps

Hello everyone,

Please can you help me?

I have a Congo Junior console which has just been moved from the production desk in the auditorium to the control booth.

When everything was reconnected and it was powered up, all I get is three slow beeps and then the LCD screens display "Congo Jr" but nothing appears on my monitors.

Do these three beeps mean something terminal (I am fearing something has become dislodged during the move) or could there be another explanation? I believe I have checked for rookie errors but would appreciate your advise ASAP.

Many thanks

Mark

Parents

0 ueliriegg over 11 years ago

i would suggest you call tech services:

"For Emergency Service Please Contact One of Our Offices:

For Technical support in the Americas please call 800/688-4116 or 608/831-4116
For Technical support in Europe, please call (+44) 20 8896 1000
For Technical support in Asia, please call (+852) 2799 1220"
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 ueliriegg over 11 years ago

i would suggest you call tech services:

"For Emergency Service Please Contact One of Our Offices:

For Technical support in the Americas please call 800/688-4116 or 608/831-4116
For Technical support in Europe, please call (+44) 20 8896 1000
For Technical support in Asia, please call (+852) 2799 1220"
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 M Jenkins over 11 years ago in reply to ueliriegg

Thanks - will do so in the morning. I was curious to know if anyone had experienced the same symptoms?

Mark
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Druuka over 11 years ago in reply to M Jenkins

didn't mean to suggest previous post as answer.... sorry I haven't seen this with the congo directly but usually beeps on startup mean that some hardware has either failed or come disconnected. The usual culprit is memory modules.

[edited by: Druuka at 3:46 PM (GMT -6) on Fri, Mar 1 2013]
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 M Jenkins over 11 years ago in reply to Druuka

Thanks, I had seen a comment about RAM problems as applied to another ETC console. Without professional advice I am not going to go poking in the back of the desk though. However the show is imminent!

-Mark
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ueliriegg over 11 years ago in reply to M Jenkins

if you're in a hurry, go call tech services now. it's 24/7
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 M Jenkins over 11 years ago in reply to ueliriegg

Thanks, sorry I have some time so not so imminent as in five minutes' time, but a Dress Rehearsal on Sunday so will ring them in the morning (UK time).

-Mark
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 M Jenkins over 11 years ago in reply to M Jenkins

Thanks to everyone for their help.

Problem now fixed, graphics card had come loose.

Thanks to 24hr Tech Support (UK) for their guidance as I don't like poking around inside lighting desks without knowing what to look for!

-Mark
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel