Masters

The Masters options mean the following:

• Inclusive
  The Master's intensity output is merged Highest-Takes-Precedence (HTP) with all other Masters and the Main Playback ([A/B])
• Inhibit
  The Master acts an a 'sub-grandmaster' for the channels it contains, setting a maximum level for those channels.
• Exclusive
  The Master takes exclusive control of the channels it contains, so levels coming from any other Master or the Main Playback are ignored.

The reason you can't bring the channel 'down' when it's from a Master is because of that HTP behaviour of an Inclusive Master.

There are two ways to do this operation, depending on your intention:

1. Edit the Master itself directly: [Modify] & [Master_Key]
   This opens a tab for the content of the Master, you can then adjust levels and [Update] the Master immediately.
   That's often what you really wanted to do anyway!
2. Capture the channel: [Capture][Capture]
   This puts you into "Capture" mode, where anything done from the keypad will override all the Masters and the Main Playback.
   A second double-hit of [Capture] takes you out of Capture mode, while the channels you touched will still be Captured.
   
   To Release the channels back to the Masters & Main Playback, select them and hit [Release].
   Double-hit of [Release] will release all channels, regardless of selection.

Does that help?

Thanks a lot that worked just fine and the way I wanted it to work. cool

Thanks for the fast reponse..

I just tried some things and the console just frooze up on me when i try the online help option. the hour glass is on top for the rest nothing??

Cheers Filip

Hi Filip,

have you had this freeze problem again?

Hi Corey

So far it has been stable

Super!

Super!

Hi Corey,

I tried to install the new offline soft on my pc and got this

The soft did not install correct and did not work.

Can anyone help me??

Filip

My guess would be that you got a bad download or the extracted file got deleted before the installer finished.

Try downloading it again, and extract the Congo640.exe file somewhere before running it, instead of running it directly from within 7zip.