Congo V4.3.3

Hi all

I figured my problem out

The folder on the flashdrive is case sensitive it had to be SOFTWARE not software

Version 4.3.3 still drops sequences assigned to masters when you change pages though. A fix would be handy.

 cheers

I am glad to hear that you got it working. We are working on an improvement of the software upgrade mechanism to make it easier and less confusing.

What do you mean with "Version 4.3.3 still drops sequences..."? All types of master content should be preserved when you change master page if the master is up. Otherwise, it will be replaced by the content of the new page.

However, you might want to try changing the Transparent setting of the master page to allow masters to preserve their content if the new page doesn't contain information for it.

Hi

If I assign a sequence (say a chase) to a master on say page two and then go to page three, when I return to page two, the chase is gone and I have to go to sequence screen, scroll down to the relevent sequence and re assign it to the master fader.

This only takes a few seconds but is a pain if I forget to do it before the show calls for the chase to be bought up.

Some questions to determine the cause of your problem:

Do you have the Auto-update Master Page otion turned on? If not, content you load to a master won't get automatically recorded into the current master page.

If you look in the Master Page editor for the master page, can you see that the sequence content has been recorded to the master?

Does it only happen with sequence or other types of master content as well?

Hi

Yes the auto update master page is turned on.

Yes the sequence content is shown on the master page editor. change up a master page and back again it dissapears from the master page editor.

It only happens with sequences.

Saving the play doesn't help, when the play is reloaded the sequences have dissapeared from the masters.

If you open the Master Page editor,do you see the sequences there?

Are you using different master pages on the upper and lower fader banks? If you use the same master page on both, they will be in conflict with each other since both banks refers to the same page.

Hi

Yes the sequence appears on the Master Page Editor when loaded into a master.

Once I change pages and come back to the page the sequence was loaded onto, it dissapears from the master page editor and the master it was assigned to.

Yes I'm using different page numbers for the upper and lower banks of master faders. Generally page 1 on the lower bank and page 2 on the upper.

 Cheers

Can you send us a showfile that displays this fault?

None of us have seen this kind of disappearance before, so we'd really like to work out what's going on!

The best address is congo (at) etcconnect (dot) com - that way the whole support team team get a copy.

Hi Richard,

I've sent a show file (my latest standard patch) to congo@etcconnect.com

I've included some basic notes.

Thanks for your help with this

Hi Richard,

We received an email from you but there seems to be no attachment. I tried to reply to that mail but it couldn't be delivered. If you read this, please send us a new mail with the attachment and I will take a look.

Hi

 I have not yet loaded 4.3.3 but enjoyed the same problem with chases etc dissapearing - trained myself to [record][page] every time I load something onto the masters. Works fine. I think the auto save master setting is glitchy.

Hi

 I have not yet loaded 4.3.3 but enjoyed the same problem with chases etc dissapearing - trained myself to [record][page] every time I load something onto the masters. Works fine. I think the auto save master setting is glitchy.

Thanks Deonlot,

I tried your suggestion and it works a treat.