• Date
    sclausen
  • Date
  • Replies 7 replies
  • Subscribers 66 subscribers
  • Views 5200 views
  • Users 0 members are here

IMPORTANT SURVEY: Are you using ETCNet2/EDMX to distribute data in your system?

Hi all -

It would be very good for us to know how many of you might still be using an ETCNet2 network (ETCNet2 DMX Nodes) to distribute data in your CONGO system. If you are using these nodes, could you please respond here with your console type and venue?

(There's nothing wrong - we're just looking for data to help us make some decisions for the future! :-) )

 

Thanks for your help - 

Sarah



[edited by: sclausen at 9:54 AM (GMT -6) on Thu, Apr 25 2013]
Parents

  • Sorry, haven't been reading the forums lately. I did get a phone call, so hopefully my input's already in, but on the off-chance...

    Yes, I'm using ETCNet2 nodes in both my spaces with my Congos, both 2-port PoE nodes and 4-port tabletop/rackmount A/C nodes. However, I do have a hybrid system in that there are 2 Net3 Gateways bracketing my Unison CMEi out of the mix, so that's different. 

     

Reply

  • Sorry, haven't been reading the forums lately. I did get a phone call, so hopefully my input's already in, but on the off-chance...

    Yes, I'm using ETCNet2 nodes in both my spaces with my Congos, both 2-port PoE nodes and 4-port tabletop/rackmount A/C nodes. However, I do have a hybrid system in that there are 2 Net3 Gateways bracketing my Unison CMEi out of the mix, so that's different. 

     

Children
No Data
Related

www.etcconnect.com