• Date
    Mark Stevens
  • Date
  • Replies 10 replies
  • Subscribers 67 subscribers
  • Views 4889 views
  • Users 0 members are here

Importing Sequences in 6.4.0

I'd like to know if anyone has solved this problem.  There seems to be no "offset" function in the latest software edition for Congo.  In older versions I would choose the sequence I wanted to import and offset the data by 200 because I had already used the preset numbers in the new show. Thus the old Q5 would become Q205.

This function seems to be absent in 6.4.0.  My work around this morning was to build another sequence in the old show with new (unused) preset numbers and then import the sequence.  OK but not as clean as before.

Mark Stevens

Abbotsford Arts Centre

Parents

  • Hi Mark,

    The renumber function is not available on the sequence level. However, it is possible to renumber the presets when you import sequence steps.

    To do what you want, select all sequence steps of the source sequence and drag them to an empty target sequence. Select the Advanced tab in the Drop dialog and check the Include related presets option. Then you can select how the preset numbers should be renumbered (packed, unpacked) and at which preset they should start.

  • in reply to Anders Ekvall

    Hello Anders,

    I will give your solution a try.  However I hope that the old method will return for future upgrades.  I rarely import individual presets.  It is almost always a completed sequence that contains a whole dance or effect that took a while to create.  The "offset" method was a simple way of renumbering.

    Mark Stevens

Reply Children
No Data
Related

www.etcconnect.com