HI
could someone tell me how I connect a Congo console to my pc with WYSIWYG???
i'm using an ethernet cable to connect both but neither one recognize the other.
HI
could someone tell me how I connect a Congo console to my pc with WYSIWYG???
i'm using an ethernet cable to connect both but neither one recognize the other.
Hi,
You need to download this http://www.etcconnect.com/docs/docs_downloads/console/Driver_setup.zip which is a driver for this. Instructions on how to use it should be included in the download.
Or
You can enable Art-Net and connect it via Art-Net.
Cheers
Bullen
Hi -
You will need to talk to Cast Software - www.cast-soft.com. ETC doesn't make the WYSIWYG software. I'm sure the folks over at Cast will be happy to help.
>>Actually, I scanned the WYG manual and there is no mention of ArtNet in there that I can find. It's possible WYSIWYG is not compatible with ArtNet.
Thanks -
Sarah
Hi -
You will need to talk to Cast Software - www.cast-soft.com. ETC doesn't make the WYSIWYG software. I'm sure the folks over at Cast will be happy to help.
>>Actually, I scanned the WYG manual and there is no mention of ArtNet in there that I can find. It's possible WYSIWYG is not compatible with ArtNet.
Thanks -
Sarah
www.etcconnect.com