• Date
    raf wouters
  • Date
  • Replies 1 reply
  • Subscribers 65 subscribers
  • Views 2421 views
  • Users 0 members are here

to use the fan function on CMY colormixing

Hello again,

I have one other issue where I can't find a solution myself.

Is it possible to use the fan function on CMY colormixing.

I want to use it the same way as I use the fan function on the PAN/TILT function.But it doesn't work that way.

Is there another way to get the same result.

 

Thanks again.

Parents

  • Hi there -

    FAN should work exactly the same way on any parameter as it does on pan & tilt. The trick is that you need the parameters to be at a level other than 0% or Full. Try placing cyan at 50 on a number of channels, then use FAN. It should work quite nicely.

    Hope this helps -

    Thanks -

    Sarah

Reply

  • Hi there -

    FAN should work exactly the same way on any parameter as it does on pan & tilt. The trick is that you need the parameters to be at a level other than 0% or Full. Try placing cyan at 50 on a number of channels, then use FAN. It should work quite nicely.

    Hope this helps -

    Thanks -

    Sarah

Children
No Data
Related

www.etcconnect.com