Template vaule to 255

This is the new MXR Apollo scroller http://www.internetapollo.com/Products/View/3093.aspx

Carl

This is the new MXR Apollo scroller http://www.internetapollo.com/Products/View/3093.aspx

Carl

Jep,

As Richard mentioned, these aren't really your standard scrollers. They act a little differently and are programmed a little differently then normal scrollers. So I think the scroller roll functionality wouldn't fully fit these devices anyway.
You could just make a bunch of ranges for the different colors on each roll and then if you have a lookup table for common colors, use the range numbers to easily access those frames on both of the rolls.
One thing that you don't get with ranges, that you have with scroller rolls, is the automatic slowing down off the roll movement when changing frames. But at the moment you could only get this for one of the rolls anyway..

Maybe there could be some other more clever way to control such devices...

Oskar
 

Thanks, at the moment Im using mine own template Ive made with the vaule's that were in the manual. These are very close to a CMY mover.

It works great but the scroll is a little jittery when moving from colour to colour.

1 = front scroll

2 = back scroll

3 = fan

Guest its me being use to a CMY colour mix on movers,

Thanks for the input guys.

Carl 

Thanks, at the moment I'm using mine own template Ive made with the value's that were in the manual. These are very close to a CMY mover.

It works great but the scroll is a little jittery when moving from colour to colour.

1 = front scroll

2 = back scroll

3 = fan

Guest its me being use to a CMY colour mix on movers,

Thanks for the input guys.

Carl