• Date
    Anne S
  • Date
  • Replies 2 replies
  • Subscribers 66 subscribers
  • Views 8986 views
  • Users 0 members are here

Loading channel(s) to a Master

Sorry if this gets posted twice, Internet Explorer just had some kind of seizure-- 

Small question:

Why, when I load selected channels to a master as an unrecorded group [PRESET & MASTER key], is the output level of that channel subtracted from Live? As I sit here in Preset 1, channel 10 is at 45%. If I select it [10 CH/ID] and hit PRESET & MASTER, it's recorded to the master at 45% but drops down to 0 in live output.

Anne.

Parents

  • Hi

    The idea of loading channels one by one to masters comes from having to balance for example a cyclorama with intensities and wanting to quickly assign them to faders for manual control. Therefore, they are "cleared" from the current field (A) so that there is no HTP conflict between the master fader and the current field (A).

    All other functions for loading information to the masters will load a "copy" - leaving the original channels in the current field.

    Make sense?

    All best - Ulf 

    PS. There is no "priority" for intensity channels other than HTP (pile-on) between all fields, and Capture to override HTP.

     

Reply

  • Hi

    The idea of loading channels one by one to masters comes from having to balance for example a cyclorama with intensities and wanting to quickly assign them to faders for manual control. Therefore, they are "cleared" from the current field (A) so that there is no HTP conflict between the master fader and the current field (A).

    All other functions for loading information to the masters will load a "copy" - leaving the original channels in the current field.

    Make sense?

    All best - Ulf 

    PS. There is no "priority" for intensity channels other than HTP (pile-on) between all fields, and Capture to override HTP.

     

Children
No Data
Related

www.etcconnect.com