How to link up Chase with one of steps in Main Playback

Hi KK,

Yes you use a Masterlink. 
One way of doing this is ( assuming yopu have the chase on a master), go to the sequence step in the Main Playback and press and hold [Insert] and then  the master key to which you assigned the chase. This creates a masterlink with a Targetlevel 100% in the sequence. Goto the sequence step where you want to stop the chase, press and hold [Insert] and then the masterkey of your chase again. This creates a masterlink with a targetlevel 0%.

I hope I could help.

Florian

Hi Florian,

Thanks a lot,

Is it a only way to do that?

KK

As always with the Congo there are more than one way to achieve this. A different way is to open the Sequence list  and insert the Masterlink in the step. This is done either by double clicking on the Masterlink box in the sequence step or  by  pressing [Insert].  This  opens  the Masterlink page for  this  step.  There you can insert  the  Master  and edit anything you want.

Florian
 

As always with the Congo there are more than one way to achieve this. A different way is to open the Sequence list  and insert the Masterlink in the step. This is done either by double clicking on the Masterlink box in the sequence step or  by  pressing [Insert].  This  opens  the Masterlink page for  this  step.  There you can insert  the  Master  and edit anything you want.

Florian