• Date
    cknapper
  • Date
  • Replies 2 replies
  • Subscribers 65 subscribers
  • Views 5841 views
  • Users 0 members are here

Am I being Greedy

Hi all, OK tonight I started planning my show and I came aross I can only have up to 100 on my direct selects buttons (which i knew but I must of had a dream you could have more !!!!!!!!). Is there anyway of having more options i.e go up to 300.

The reason for this is I have my movers and scrollers and other fixtures and stage wash's and I've done my groups up to 210.  Can I put these onto the direct select buttons or is the only way to do this by putting my groups into the master playbacks as I have them now and selecting thses from there.

 

Carlos.

  • Hi Crlos -

    There's no way to get any data type over 100 onto the direct selects. You have a few options:

    1) Renumber your groups so that they fall into the 1-100 space.

    2) Place groups numbered higher than 100 onto the masters.

    3) Recall groups higher than 100 using the # GROUP syntax on the keypad.

    4) Create a channel layout with all those groups on it and use the trackball (or if you have a touchscreen that does not require special driver software, you could use that).

    Thanks -

    Sarah
     

  • in reply to sclausen

    Hi Sarah,

    I've made channel layout and use this loads for selecting channels, I think i will keep my way and bump these onto my masters. your 3rd option would be cool but i have a mind of a drain and cant remember my groups as you understand 200 is a lot to remember !!!!!

     

    Thanks any way Carlos

Related

www.etcconnect.com