• State Verified Answer
  • Date
    mirkoberg
  • Date
  • Replies 4 replies
  • Subscribers 67 subscribers
  • Views 5228 views
  • Users 0 members are here

Avab presto - set 0.0 time?

Hi!

I'm new on avab presto consolle, and I'm not getting how to set a 0.0 time - setting a 0.1 time is ok, but if I type [0] [. ] [0] the keypad display remains clear and I cannot set the value.

Am I missing something?

Thanks! 

Parents
  • 0

    On the Cobalt, which came from Avab software, a 0 time cue is a preset meant to run at the default time of the console when the preset is executed.  That is why it doesn't show a value.  

    On the Presto, can you set the default time to 0.0?  IIf you can, then a preset with a 0 time will run the default 0.0 time.  This is the workaround on Cobalt to make an absolute 0.0 timed event.

    I hope this helps.

    John

Reply
  • 0

    On the Cobalt, which came from Avab software, a 0 time cue is a preset meant to run at the default time of the console when the preset is executed.  That is why it doesn't show a value.  

    On the Presto, can you set the default time to 0.0?  IIf you can, then a preset with a 0 time will run the default 0.0 time.  This is the workaround on Cobalt to make an absolute 0.0 timed event.

    I hope this helps.

    John

Children
Related

www.etcconnect.com