• State Not Answered
  • Date
    Kerrie
  • Date
  • Replies 3 replies
  • Subscribers 66 subscribers
  • Views 4139 views
  • Users 0 members are here

automark time

Is there a way to make the automark time faster on the congo jn? The automark time seems to be set to the time on the cue thats in B fader. Some of the fade times in the show are very long so it doesn't have time to mark before the next cue goes. I don't have time to put in snap follow cues to make move faster.

Parents
  • 0

    Hi Kerrie -

    There is no "automark time" on Congo/jr. The Automark time is the time from the step in B. You can quickly change the FCB timing for those cues where the original fade time is too long using the # MODIFY & TIME command. The # in this case is the preset number (or step number if GOTO is set to use step numbers) where the moves are recorded. I'm guessing you are using FCB times that are set to 100% (which equals the In time of that step). Change these to 10%, or to a real time value like 1 second, for those presets and it shoud help.

    Thanks -

    Sarah

Reply
  • 0

    Hi Kerrie -

    There is no "automark time" on Congo/jr. The Automark time is the time from the step in B. You can quickly change the FCB timing for those cues where the original fade time is too long using the # MODIFY & TIME command. The # in this case is the preset number (or step number if GOTO is set to use step numbers) where the moves are recorded. I'm guessing you are using FCB times that are set to 100% (which equals the In time of that step). Change these to 10%, or to a real time value like 1 second, for those presets and it shoud help.

    Thanks -

    Sarah

Children
  • 0 in reply to sclausen

    thanks. I was trying to avoid going through all 240 cues and change the attribute times was hoping that I could just change one setting and fix the whole show.

  • 0 in reply to Kerrie

    There is a global setting in the settings dialogue under Attributes, but it doesn't change already recorded presets, only new presets.  The workaround is to open up the preset list, go over to the F-Time, C-Time, and B-Time column at the top, press Column to highlight the whole column, and then put in the new times.  Should save you some work.

www.etcconnect.com