• State Not Answered
  • Date
    emma westerberg
  • Date
  • Replies 1 reply
  • Subscribers 65 subscribers
  • Views 2607 views
  • Users 0 members are here

SOLO flash on congo JR 5.0.1

i can't get the solo flash to work on my congo... the master is just added to the outgoing light, not replacing it..

 

 



[edited by: emma westerberg at 8:18 AM (GMT -6) on Mon, Sep 21 2009]
Parents
  • 0

    In v5.1.0 and older, to set a Master to SOLO flash mode, hold down the [FLASH MODE] key and toggle the mode using the Master Key.

    In v6, this is one of the pages of settings accessible via the [FLASH MODE] key, or you can use [Setup] & [Master Key] to choose the option in the popup.

    The [SOLO] key can be used to 'mute' all other playbacks completely..

    Finally, Solo Flash Mode only overrides the other Masters, it doesn't override the Main Playback. This allows a 'background' look to come from Main Playback while busking over it with the Masters.



    [edited by: Richard at 9:55 AM (GMT -6) on Mon, Sep 21 2009]
Reply
  • 0

    In v5.1.0 and older, to set a Master to SOLO flash mode, hold down the [FLASH MODE] key and toggle the mode using the Master Key.

    In v6, this is one of the pages of settings accessible via the [FLASH MODE] key, or you can use [Setup] & [Master Key] to choose the option in the popup.

    The [SOLO] key can be used to 'mute' all other playbacks completely..

    Finally, Solo Flash Mode only overrides the other Masters, it doesn't override the Main Playback. This allows a 'background' look to come from Main Playback while busking over it with the Masters.



    [edited by: Richard at 9:55 AM (GMT -6) on Mon, Sep 21 2009]
Children
No Data
Related

www.etcconnect.com