Updating Preset in Playback -for the hard of thinking

Hi Richard -

Just press UPDATE. :-)

If you want to record what's in A, minus content from the Masters, type # RECORD & A, where the # is the preset number currently in A.
 

Thanks -

Sarah 

Hi Sarah,

That's what I'd figured out but it's all a bit too complicated for our setup.

It's all tied in to the desk wanting to always record the whole Live output by default whenever you hit [Record] or [Update].

This is causing no end of grief as the wrong content is getting recorded into the wrong presets.

That's why [Update] + [A] seemed like the logical answer -if it worked (which it doesn't)

Much grumpiness

Richard

Here's how to do it:

1. Make your changes on the keypad only - don't use Masters (for obvious reasons)
2. Hit [A] to open or activate the A field tab.
   
3. Hit [Update]

Job done - albeit in a strange way!

You can also do the following:

1. Hit [B] to open the B field tab.
2. Make changes on the keypad (blind!)
3. Hit [Update] 

Sarah, TV studios want to be able to do this all the time as they tend to be programming one thing while the show is running on Masters, so can we add the [Update] & [A] function in a later version, as it does seem more intuitive than [A], [Update].

Here's how to do it:

1. Make your changes on the keypad only - don't use Masters (for obvious reasons)
2. Hit [A] to open or activate the A field tab.
   
3. Hit [Update]

Job done - albeit in a strange way!

You can also do the following:

1. Hit [B] to open the B field tab.
2. Make changes on the keypad (blind!)
3. Hit [Update] 

Sarah, TV studios want to be able to do this all the time as they tend to be programming one thing while the show is running on Masters, so can we add the [Update] & [A] function in a later version, as it does seem more intuitive than [A], [Update].

yes please...