Selecting hexadecimal value for attribute

Hi Orri,

I am not sure about the purpose of this. Does Catalyst use hexadecimal numbers for its media? We have been running lots of Catalysts with Congo and I haven't heard about this before. Could you tell us a little bit more about your configuation?

PS. How would you enter the letters a-f of a hexadecimal number thru the numerical keypad?

Richard pointed out that you probably search for a way to enter the raw values (0-255). (Sorry for the confusion. For a programmer like me, hexadecimal is something quite different.)

You can toggle both the display and the number entry mode between the 0-100% representation and the 0-255 representation with the, somewhat hidden, command FORMAT & @LEVEL. Note: This is a global mode and it affects all parameters until you turn it off.

Richard pointed out that you probably search for a way to enter the raw values (0-255). (Sorry for the confusion. For a programmer like me, hexadecimal is something quite different.)

You can toggle both the display and the number entry mode between the 0-100% representation and the 0-255 representation with the, somewhat hidden, command FORMAT & @LEVEL. Note: This is a global mode and it affects all parameters until you turn it off.

Hi Orri

There is a method of changing and inputting by "Format &@" or the method of creating 256 steps in the parameter range of a template.

 
Intensity can be inputted at 256 bits by "*** point & @."

Best regards,

Kani

Brilliant, works like a charm