Fader wings

Can some tell me if a Universal Fader Wing will work with a Congo?  I want to access some of the functions of the console remotely and am wondering if a fader wing will work?

Mark Stevens

Parents
  • Hi Mark -

    Yes, Universal Wings work with Congo. When you say "remotely", though, what do you mean? What kind of system setup are you thinking of using?

     

    Thanks much!

    Sarah

  • I want to run a few channels or submasters of lighting from somewhere not directly next to the console.  This could be for a stage manager at a production table, or at the sound board when its a symphony concert and lighting is very simple.  So my thought was a fader wing connected via USB cable.  Do you see any problem with this?

    Mark

  • well if your stage manager is only 3 meters from the console its fine, but usb gets unreliable aflonger that even withextenders. u could put a client pc by the stage managervia ethernet cable and that can be 100 meters away
  • Is this my only solution?  I'm after a handful of faders so that a non lighting person can get some light on the stage.  So the fader wing idea is a problem if the run is more than 3 meters?

    Mark

  • Hi Mark -

    What Corey says is true - the limit on the length of USB cable makes the distance you can "remote" the faders not so very far away. The suggestion of using a client PC or an RVI with a wing is the way to go if you need to be more than 15 feet/5 meters away from the console itself. The advantage of using a client is that you can also connect displays and see the position of the cue list, or do other things with your show from that location if you need to.

    Thanks much -

    Sarah

  • hi Mark, what dimmer rack do you have? if its a Sensor + then you can have a small SMartlink power supply installed in the rack and then you can put a button station anywhere in the theater with a simpple two wire cable and then recalls presets from this SMartlink button station.
Reply
  • hi Mark, what dimmer rack do you have? if its a Sensor + then you can have a small SMartlink power supply installed in the rack and then you can put a button station anywhere in the theater with a simpple two wire cable and then recalls presets from this SMartlink button station.
Children
  • No luck there.  This is an older theatre (25 years) with a variety of EC, Strand and ETC Smartpacks spread around the space.

    Mark

  • well Smartpack can also use SMartlink Stations withthe power supply hardware upgrade . i think it would better if you chatted with one of our reps and they explain all your possibilities. can you send us your contsct info?