Congo Templates for the High End Systems XT-1 and Martin Entour 350

Hi,

I'm working on a  template for the High End intellaspot XT-1, but it's not quite done yet.

I will check what info I find for the Entour 350, it shouldn't be a problem for me to create a template for the Entour also.

When do you need the templates?

Oskar

Yesterday...  or whenever

Hello again,

Here is a template for the High End intellaspot XT-1. You'll need to import it into your showfile.

Unzip the hesintellaspotxt1_template.asc file from the .zip file and put the .asc file on a USB stick. Then take the USB stick to your Congo, plug it in and go to Browser > Files > Import from > USB Memory and locate the .asc file. Then press Modify to open Import Wizard. Use the following setting

Import what: Template
Start at: intellaspot XT-1
Stop at: intellaspot XT-1

The rest you can leave untouched. And then click Execute and the template will be imported to your show.

I'll get the Mac350 Entour template to you as soon as I finish it. Both templates will be included in the next release of Congo.

Let me know if you encounter any problems with the template.

Oskar

And here is the Martin Mac350 Entour templates. The file includes both the 8-bit and 16-bit versions. 16-bit is recommended.

Use the same procedure to import into your show.

Oskar

Awesome!  Thanks...