Hello
I have used for moving heads mainly the Congo rather than the Congo Jr, however a gig I'm doing on Saturday have hired a Congo Jr.
I'm going to be using 2 Mac 250 entours and playing around with the Jr in my venue today I cant seem to find where the colour is. I have found where the pan/tilt are and the gobo and strobe/shutter however if I press the direct select marked U3 it comes up with intensity over the four wheels and I cant find where the colours are.
Any ideas
Patch
The Color button is just to the right of the encoder wheels in a group of 6 keys. When you select your devices, the encoders default to whichever is parameter group is already selected. In this case, it's probably defaulted to Focus. If you press Color, the key will light up and the encoders should switch over to CMY, RGB, or HSI depending on how you have it setup. It's much like how a full-size Congo works.
Here's a blurry photo that may help you out: 
If you have trouble getting into the groove of how direct selects work on a Jr., I'd suggest reading this wiki entry on the subject.
Hopefully I've answered your question but let me know if you still have questions or problems.
The Color button is just to the right of the encoder wheels in a group of 6 keys. When you select your devices, the encoders default to whichever is parameter group is already selected. In this case, it's probably defaulted to Focus. If you press Color, the key will light up and the encoders should switch over to CMY, RGB, or HSI depending on how you have it setup. It's much like how a full-size Congo works.
Here's a blurry photo that may help you out:
If you have trouble getting into the groove of how direct selects work on a Jr., I'd suggest reading this wiki entry on the subject.
Hopefully I've answered your question but let me know if you still have questions or problems.
