• Date
    patch
  • Date
  • Replies 2 replies
  • Subscribers 66 subscribers
  • Views 3403 views
  • Users 0 members are here

Etc Congo Jr moving head problem

Hello 

I have used for moving heads mainly the Congo rather than the Congo Jr, however a gig I'm doing on Saturday have hired a Congo Jr. 
I'm going to be using 2 Mac 250 entours and playing around with the Jr in my venue today I cant seem to find where the colour is. I have found where the pan/tilt are and the gobo and strobe/shutter however if I press the direct select marked U3 it comes up with intensity over the four wheels and I cant find where the colours are. 

Any ideas 

Patch 

Parents

  • The U1, U2 and U3 Direct Select buttons on Congo jr and the [U1] , [U2], and [U3] hard keys on the Congo are the 'User' attributes keys, and you can configure these to show any set of attributes you want on the encoders - eg Pan, Tilt, Zoom, Iris all together.

    They are also used for Effect Playback attributes, as Effects don't really have focus, color or beam!

    On Congo jr, these User attribute keys are also available by holding down [C/Alt] and hitting [Focus], [Color] or [Beam] for U1,2,3 respectively.

    The usual sets of Focus, Color and Beam are always under the hard keys [Focus] [Color] and [Beam] shown in the post above.

Reply

  • The U1, U2 and U3 Direct Select buttons on Congo jr and the [U1] , [U2], and [U3] hard keys on the Congo are the 'User' attributes keys, and you can configure these to show any set of attributes you want on the encoders - eg Pan, Tilt, Zoom, Iris all together.

    They are also used for Effect Playback attributes, as Effects don't really have focus, color or beam!

    On Congo jr, these User attribute keys are also available by holding down [C/Alt] and hitting [Focus], [Color] or [Beam] for U1,2,3 respectively.

    The usual sets of Focus, Color and Beam are always under the hard keys [Focus] [Color] and [Beam] shown in the post above.

Children
No Data
Related

www.etcconnect.com