16bit control

hello,

in the template, you can choose fine step default is 4 but if you set 1, you have got best sensibility.

If parameter is LTP16, congo control it in 16 bit. 

in the setup if you tick  "Course/Fine 16 bit control." you are in 8 bit, less precision in fact. Do not tick this parameter.

Hi

I also changed "Fine Step" with 0, 1, 2, and 3.
At this time, change was seen only for 0.
(A parameter did not move by the encoder.) Others had no change.

These are all looking at the DMX numerical value of DMXTER.

 Best regards

kani

Hi

I also changed "Fine Step" with 0, 1, 2, and 3.
At this time, change was seen only for 0.
(A parameter did not move by the encoder.) Others had no change.

These are all looking at the DMX numerical value of DMXTER.

 Best regards

kani

Hi 

As for this phenomenon, only CongoJr happens.

At Congo, it operates by 1decimal.

Please change softwear.

Best regards,

Kani