Submasters

Not sure what you mean here Orri, could you give some examples?

Not sure what you mean here Orri, could you give some examples?

When recording channel 931 as preset onto a submaster it shows CH 91 on the top row.

Regards,
Orri

Interesting: I just tried recording a Channel to a Master with the syntax "913 [CH] & [Master button] and it shows "Ch913", with no spaces at all. "91 [CH] & [Master Button]" shows the content labeled as "Ch91", still no spaces.

I'm still on version 6.04 here; did something change? 

in version 6.1 you only get two numbers when recording a channel directly onto a submaster which is not a good thing.  The third letter does show on the second line but not if the channel in question is a device.  Then the second line shows the device type.

Regards,
Orri

We will revisit this for a future version to see if we can come up with a better solution.

Personally, I'd rather be seeing the channel text than the number, if you have text assigned.  EDIT: Just realized now that I have 6.1 in the system, that that's included! Yay! I'm quite happy with that as a solution.

As a happy compromise, coud the space after Ch be omitted so that three letter channel numbers are displayed (I guess majority of the numbers used are 1, 2 or 3 letters).

I dump channels onto subs when programming and then delete them or record over them when I move onto another scene etc.  Labeling channels is not someting I spend alot of time on.

Regards,
Orri